Squeaking new upper control arm bushes

this subforum is dedicated to our dear english-speaking vw-bus-drivers... feel free to ask, mention, and contribute on all topics regarding vw vans!

Moderatoren: jany, Staff

Antworten
Benutzeravatar
ZsZ
Poster
Beiträge: 60
Registriert: 14.02.2013, 17:42
Modell: T3
Aufbauart/Ausstattung: Multivan
Leistung: 66 PS
Motorkennbuchstabe: 1Z
Anzahl der Busse: 1
Wohnort: Budapest, Ungarn
Kontaktdaten:

Squeaking new upper control arm bushes

Beitrag von ZsZ »

Hi all!
Along my sufferings with the roof, my two month old (ran ~2000kms) Lemförder branded upper control arm bushings started to squeak.
Is there any proven rubber friendly spray lubricant that would work there?
I have read to use Fluidfilm on US forums, but in my experience fluidfilm swells up rubber, so I think it would damage the bushing.
Würth HHS 2000 said to be rubber friendly. Is it true?
Or use some PTFE or MoS2 spray?
Thanks!
Zoltan
Benutzeravatar
Atlantik90
Antik-Inventar
Beiträge: 25021
Registriert: 05.10.2004, 23:15
Modell: T3
Aufbauart/Ausstattung: 2WD Atlantic; 4WD MV
Leistung: 70 PS
Motorkennbuchstabe: JX
Anzahl der Busse: 2
Wohnort: BA

Re: Squeaking new upper control arm bushes

Beitrag von Atlantik90 »

Hallo
when you changed the upper bushings did you make the welding points on the bushing to U-arm/wishbone. This is neccessary on the sheet metal formed U-arms at the rear wheel drive T3.
If the new bushing turns in the Wishbone it may squeak.
Else check if the selfsecuring nut on the spindle is fixed with 75 Nm torque. If you used use selfsecuring nuts there, they will turn loose. At first you will get squeaking noise and later rumbling.
Unfall- und störungsfreie Fahrt mit dem VW-Bus
wünscht Joachim
Von mir als Beispiel für Verfügbarkeit gesetzte Lieferanten-links sind keine Empfehlung.
Irren ist menschlich; keine PN, fragt im Forum
Wer die VW-Reparaturleitfäden hat, hat weniger Fragen.
Benutzeravatar
ZsZ
Poster
Beiträge: 60
Registriert: 14.02.2013, 17:42
Modell: T3
Aufbauart/Ausstattung: Multivan
Leistung: 66 PS
Motorkennbuchstabe: 1Z
Anzahl der Busse: 1
Wohnort: Budapest, Ungarn
Kontaktdaten:

Re: Squeaking new upper control arm bushes

Beitrag von ZsZ »

Yes I have welded them, but those bushings have some black coating that made weldings difficult before so it it was my first thought, but I did not see marks of turning. However not checked it fully with the upper balljoint bolts removed.
I have reused the original nuts. I have torqued them but I am not sure what they did at the alignment shop so may worth re torqueing the nut.
Thanks
Zoltan
Benutzeravatar
ZsZ
Poster
Beiträge: 60
Registriert: 14.02.2013, 17:42
Modell: T3
Aufbauart/Ausstattung: Multivan
Leistung: 66 PS
Motorkennbuchstabe: 1Z
Anzahl der Busse: 1
Wohnort: Budapest, Ungarn
Kontaktdaten:

Re: Squeaking new upper control arm bushes

Beitrag von ZsZ »

It is squeaking because the welding did not hold the bushing in place.
Pic:
https://photos.app.goo.gl/ywHeP9zxYTpSaJGc7
Zoltan
Antworten

Zurück zu „English-Corner“